Module Name

Thompson Wire

Owner

Mike Clements

Description

Wire mill based on a now demolished factory complex in Worcester, MA along the B&A route. The scenery is 90% buildings, natural scenery is early winter/late fall inspired by Paul Dolkos article in 11/99 Model Railroader.

Module Type

4’ straight

Switch(es) Description

Side track off of third track, trailing point moving from right to left, controlled by choke rod mechanism as described by Mike Tylick in 9/89 Model Railroader

Track Description

Left Side

Middle

Right Side

5, 7, 10

5, 7, 10, 12

5, 7, 9

Switches

 

10/12

 

Control Panels

 

Build History

Date

Inspected by

Purchase

Summer ‘01

 

Woodwork

10/01

@ Pepperell Siding show in Townsend.

Electrical

10/01

Not sure who inspected, probably Mark Harlow

Pre Scenery Run

10/01

& Jeff Turner.

Post Scenery Run (1st show)

2/02

 

Electrical Upgrades

Upgrade -DCC

n/a

 

Upgrade – Blue circuit

n/a

 

Upgrade – Orange Circuit

9/05

Gerry Covino/Mark Harlow

Upgrade – PowerPole Connectors

9/05

Gerry Covino/Mark Harlow

 

Original Builder(s)

Mike Clements

Current Maintainer(s)

Mike Clements

Original Build

Summer ‘01

Built from kit during Summer 2001, I substituted hand laid track for Atlas flex track.  The mains are code 100, the third track and siding code 70. The turnout was built using a Micro Engineering kit. I ballasted after laying the ties and before laying rails.  I also added some basic landforms at this time and then had the initial inspection done.

Scenery

Initial scenery

 

 

First Show

2/02

Springfield – added most of the core structures to the module + highway and overpass.

1st upgrade to scenery

11/03

Major scenery upgrade, having finished all of the structures I added trees (dried weeds), ground cover (ground up leaves), tall grass and parking lots (sifted baseball diamond dirt)

2nd upgrade to scenery

Spring-Summer ‘05

Added details including figures and vehicles – this is ongoing

 

 

 

 

Module List | Layout List | Shows